How to light the rotisserie burner (model PG-40602SRL)
How to light the Rotisserie Burner:
Press and hold the knob to the high setting, maintaining the hold for 30 seconds.
Maintain your grip without releasing, and then return the knob to the off position. Subsequently, switch it to the on position.
This procedure guarantees the flow of gas to the rotisserie burner for ignition.
Not lighting:
Take off the rotisserie control knob using a pair of pliers, following the same steps. Once it ignites, reattach the knob, and it should remain lit.
Module Not clicking:
Step 1.
5 Terminal Electronic Ignition Module
3 Black Small Wire (L shape)
1 Orange small wire (L shape) Rotisserie
1 Large Clear cap
Loose wire:
A. The circular end links to the insulation tube beneath the sideburner.
B. The 90 degree (L shape) end connects to the module.
Round Tip 90 degree tip
Step 2.
AA Battery positive end (+) facing outward
Step 3. Page 26.
1. Picture B: The silver ring ground wire is touching the right-side panel
2. Picture C: The rubber washer and nut installed from the front side of the right side panel
